Martin Automatic Systems clamshell style Pail Catchers are a cost-effective and simple way to bring out and orient pails from under an injection molding machine. Pail Catchers will not interfere with the molding cycle time.
Single Cavity Pail Catcher (CB 06)
The pail drops into a funnel shaped catcher. Two hinged doors then open and the pail is pushed onto a powered roller conveyor by means of an air cylinder. The top of the catcher has 3/8" diameter-rounded edges, and the bottom of the catcher is a flat steel plate, to protect the pail from damage. This system has a very low profile and adds less than 3 1/2" to the pail height.
Single Cavity Pail Catcher (CB 06 PN)
A Pail Catcher similar to CB 06, featuring a pneumatic linear actuator to convey the pails.
Single Cavity Pail Catcher (CB 06 BL)
A Pail Catcher similar to CB 06, featuring a belt conveyor.
Single Cavity Pail Catcher (CB 06 PN)
A Pail Catcher similar to CB 06, featuring a pneumatic linear actuator to convey the pails.
Dual Cavity Pail Catcher (CB 07)
A dual clamshell style catcher, featuring a belt conveyor.
|
